The focus of company is to satisfy customer requirement by Providing

High Quality Reliable Product

Competitive Price

Just in Time Delivery

Starter Motor Range

In starters that use Direct Drive, the armature shaft of the starter motor is attached directly to the drive mechanism. Although “gear reduction” technically takes place between the starter’s pinion gear and the ring gear on the flywheel or flex plate, the pinion gear itself rotates in a 1:1 ratio with the armature shaft.

Large, low speed motor

Rotates a pinion gear in a 1:1 ratio
Typically cheaper
sirect-drive21

BOSCH TYPE – 12V/2.8KW

Untitled-153

LUCAS TYPE M45 / M127 IN BOSCH DESIGN (12 V - 2.8 KW)

Untitled-1215

M45/M127.... STARTER MOTOR – 2.1 - 2.7 KW

Gear reduction starters use gears to reduce the speed of a higher-speed electric motor in order to extract more torque at the flywheel end of the starter. Two typical designs are Offset Gear Reduction and Planetary Gear Reduction. In the former, the motor armature and Bendix drive are not in-line, whereas in the latter they are lined up.

Small, fast motor
Rotates a pinion gear in a 4:1 ratio
Typically more expensive
Untitled-44

Gear Reduction Starter 12 V/3.5 KW

Reduction-Gear-Starter-Motor

Gear Reduction Starter 12 V/3.5 KW

Untitled-110

Gear Reduction Starter 12 V/3.5 KW